RoutineSlider
Tame Grove
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-06-26 23:28:27
0
0
000설명
태그
모델 소스
리뷰(0)
A tool to track your routine.
I use it in the morning ant the evening to track my routine, so I don't forget anything in the middle of it.
No glue required.
Parts you need to print:
amount | name | color |
|---|---|---|
1 | RoutineSliderBottom | color of your liking, I used white |
1 | RoutineSliderTop | color of your liking, I used black |
1 | RoutineSliderKnobAtt | doesn't mater |
2 | RoutineSliderKnobTop | one each with previously used color |
My printer settings:
Filament | PLA |
|---|---|
Layer height | 0.2 mm |
Nozzle | 0.4 mm |
Temp | 205 °c |
I printed the RoutineSliderKnobTop with other parts and with the two round ends facing sideways.
My printer settings wouldn't allow a slow enough print for the insert to not warp and I didn't want to fiddle to much around.
The sideways print allows better stability and a better fit for the installation of the RoutineSliderKnobTop's
Assembly:
Cut piece of paper to size. 8 cm x 17 cm
Write down routine with 5 mm gap to border and each other
Insert piece of paper into Bottom
Insert KnobAtt into Bottom (Triangle should face left or right for better fit)
Place Top on Bottom and squish parts together (friction should held the pieces together)
Insert the two KnobTop's into the KnobAtt
DONE!
I'm working on a better solution for the KnobAtt and the KnobTop. I'll upload the improved version as soon as it's ready.
Please let me know what you think of the project and I hope you enjoy it.
Greez
Honki
태그
모델 소스
원본 링크: 자세히 보기
CC-BY