Updated the older model, the new box is heavily inspired by the token box by PrintArtificer at Etsy.

The box holds a complete set of tokens for the card game Netrunner by Aurbits (2025), this includes the credit tokens.

The new design is made with multicolor and embebed magnets for closing and securing the lid. If you don't want any of this features you can just print it as is in single color, though you will probably need a rubber band or something to hold the lid in place.

If you want to do multicolor and the magnets you will need to split the model into parts in the slicer (I did it on PursaSlicer). For the multicolor then you will need to select the individual color of each part and the smart fill paint brush for the white borders.

For the magnets, they are round size 6x3. For the model you need to "Change Type" of the part as a "Negative Volume" (left click on the part) and then add a pause to insert the magnets. For a 0.2mm layer setting the pause on the box is on layer 113 and the lid on layer 18. Mind the polarity of the magnets when inserting them since you can't take them out once finished.

For easier printing g-code files are also added. This are for a Pursa MK4S with MMU3 and a 0.4 nozzle. The colours are set 1. Black, 2. White, 3. Blue, 4. Red.