This is a small HDD-inspired keychain.

It has a simple hard-drive look with raised details, including a platter, actuator arm, screws, label area, connector details and a reinforced keyring hole.

The model is made to print flat on the bed and does not need supports.

I designed it as a small tech-themed keychain for PC, hardware and retro storage fans.

Print settings:

- Layer height: 0.20 mm

- Nozzle: 0.4 mm

- Infill: 15–20 %

- Walls: 3

- Supports: No

- Build plate adhesion: Skirt or brim if needed

- Material: PLA / PLA+

The model in the second photo was printed in metallic PLA.