This is the first thing I have made and upload !

This is a magnetic wall support for kitchen knives. (Must print this part two times or clone it to make it complete! ) = ( 15 cm X 2 ) total of 30 cm

I have made the part with multiples magnets holes ( for different size of knives )
Holes are 25.5 mm large and 2.2 mm depth. I used strong neodymium magnets, ( must be glued in the holes)
You can buy these on ebay or aliexpress )

the screws holes are 4.7mm and 7mm ( at the screw head)