07/08/2025:

Hello everyone !
I bought recently this anycubic camera to connect it to my T300. So i need a similar bracket style as you can find already on wiki.anycubic. I only took from the original design, the clipping part and convert it on my model. It fits and works but i need to correct a bit some measurements but its printable and works fine for my first try Friday print ^^.

Soon i come back to it, i will add some rotation module part so the camera can be turned in the angle we like.

Like & share its always welcome to see different design !

08/07/2025 Updates: Comgrow T300 Camholder bracket V1.2

Well as you can see, i kept only the box where the camera goes inside and i added some parts to print so the cam can look at any direction .
since i took the clipping part away and remodel my design, i kinda lost in height (now its almost 10cm height ) and its enough for me. you can change the height if you want.
I use my camera for surveillance only no need for time-laps ^^.

I use Naynmaer 3D Print PLA GLUE to glue the Nuts on place & M3x4mm Hex Socket Head Cap Screw to fix all together.
They are already many things or ways to make what i did, but i needed something suitable instantly and not to long to print.

happy printing