As the name says, this is NOT A FLAMETHROWER, its just a deodorant canister holder, that with the proper circuit, can light a significant flame.

I have made another version of this some time ago, but i was really unhappy with its ergonomics, weight, efficiency and design, so i made some tweaks and hopefully, fixed most of its issues.

As the creator of this device, i DO NOT CONDONE any irresponsible uses that might hurt the user or any type of living being, its made to be used only for fun and as a proof of concept.

Be safe, have fun.

Creality

K1

Doesn't Matter

Doesn't Matter

...

Used 10%, but anything above that will do really

PLA

I am still working on this project, later on, i will post an assembly video for the 3D printed parts and the circuitry too.

To assemble the 3D printed parts, you will require:
-A M3 screws set;
-A screwdriver;
-Some elastic bands;

For the circuitry:
-A push button;
-Soldering iron;
-Some wires;
-18650 lithium battery(witch can be bought by the following link:https://www.amazon.com/Yehofova-Rechargeable-Genuine18650-flashlights-headlamp/dp/B0D97VC9PK/ref=sr_1_4?crid=292GCN0PFW9R2&dib=eyJ2IjoiMSJ9.dLPVYP15_pg_aPAzi1m2VeVxVx_vFdrG4DKpaWgzRcCt9XjF8MGDNk1ChBSp3hm66U2xzK5aGzC2wO5h1ThjZ3KBHfmTblkcJ64rZcawMwZY11dk0hLpAGSkHnusK4LiC5Zk54eBpypbZXyIwFTVVDmqNkp_zzxl-iGDjPp4RVF7fWV101HuwE731ITcOquFoq9fYNSKmxdNgyCHw3V01UZzrb6KT-is-zIQr3M8IBk.nTyWsRQ0WXcCby5ROViqLNQZiUCS5sJ51Xrg_zQ0GsE&dib_tag=se&keywords=18650&qid=1738551642&sprefix=18650%2Caps%2C224&sr=8-4&th=1);
-High voltage generator circuit(witch can be bought by the following link:https://www.amazon.com/DEVMO-400000V-Step-up-High-Voltage-Generator/dp/B07T3XDMH8/ref=sr_1_1_sspa?dib=eyJ2IjoiMSJ9.Zf__06J0BHRgUQZ8Inx8Vn6X7GumuHsdJDOQ1RZMLPXsVaNjvzIK0r8UD2T0dNP0HK9rD9IvWvUR_2-1QYvmwkJMBqelmKhNA4A_jDRR7YNi9AYCqRZ9i8krhjT7QCSsXaYhisEiQ7dWsxdVpHLufJlyleBoYUcXnB9gI&th=1);
(Observation: be careful while handling lithium batteries and high voltage, as they might cause harm)