The printing has already started, but it's not completely finished yet! The electronic components are still firmly fixed on the original baseboard, and I'm designing a brand-new casing for them.

Printing components:

• stop-holder.stl ×1
• Y-axis guide rail.stl ×4
• Y-type bracket.stl ×2
• Y-type bracket
• Y-axis motor mount. stl ×1
• Y-axis limit block mounting bracket.stl ×1
• Z-axis motor mount.stl ×1
• Z-axis guide rail.stl ×4
• Z-axis limit clamp v1.stl ×1

Profiles:

• 4 pieces of 2020 aluminum profiles - natural anodized, length 440mm
• 4 pieces of 2020 aluminum profiles - natural anodized, length 303mm
• 4 pieces of 2020 aluminum profiles - natural anodized, length 350mm

Added hardware:

• Cast 28 90-degree angle brackets
• 56 M5 flat-head screws
• 28 M5 flat-head screws
• 4 pieces of 1/4"-20×1/2" set screws

Organic glass side panels

• 2 pieces of 12.5"×13"×1/8" transparent acrylic boards
• 2 pieces of 12.5"×18"×1/8" transparent acrylic boards

Finally:

• 1 FlashForge Creator