The parking signs are for private use. They are also suitable for game rooms.

For indoor use, PLA printing is sufficient. For outdoor use, I recommend using at least PETG.

I made this sign very sturdy, so it can better withstand some demands.

I printed it on the P2S using a 0.6mm hardened nozzle.

I don't have a smooth surface. Unfortunately, due to the 0.6mm nozzle and printing at a higher speed, the surface has some unevenness.

But it would be better to print at a standard speed with a 0.4mm nozzle. Otherwise, just select "Smooth Surface".