Raspberry Pi Camera mount part compatible with Robotis Turtlebot3 base.

This part has two models respect to mounting the Raspberry Pi Camera.

• The screwed model is used for mounting the camera with four M1.8x8 or M2x8mm bolts and four M1.8 or M2 nuts respectively.

• The melted pin model is used for mounting the camera by melting the plastic pins in mounting holes. You can melt pins with a soldering iron or preheating metal rods like screws or bolts.

The holder has mounting holes compatible with the Robots Turtlebot3 bases present in both burger and waffle models. You need four M2x15 bolts for mounting the part to the robot base.

Note: Please mount the camera with its flex cable fitted. Otherwise, it may be hard to fit the flex cable.

Creality

Ender-3 v2

Doesn't Matter

Yes