A webcam mount for the emeet nova webcam to mount it on a standard aluminium 3D printer extrusion. You need either 2x M3x20 screws or one M3x35/40 screw for the swivel plate and a M2 self-tapping screw to mount the camera, that has been relieved of its original stand, to the plate. On a printer with tight tolerances, the resulting mount should be stiff enough but still allow for tilt and rotating motion. If you need to make any adjustments, the FreeCAD file is included.
Print with standard Voron settings in ABS or better if used inside an enclosed printer.

update: added a separate, larger mounting plate that's 2mm longer and allows for more tilt if you mount it right above the doors of an enclosed Trident (for example).