1) Product information:
The product is developed to help users simplify the laundry process by providing approximate measurement values for detergent based on three selected washing stages. These stages were determined through communication with ChatGPT and verified through manual mathematical calculations to ensure accurate design and functionality.

2) Production manual:
This product is designed for Fused Deposition Modelling (FDM) 3D printing, primarily using Polylactic Acid (PLA) filament. Other compatible filaments may also be used depending on specific requirements you have decided.

Slicer Software: Cura
Recommended Slicer Settings:

• Layer Height: 0.15 mm
• Infill Density: 15%
• Infill Pattern: Grid
• Wall Thickness: 1.26 mm
• Build Plate Adhesion: Brim
• Supports: Not required (orient the model so the largest opening is parallel with the build plate)

Ensure proper calibration of the printer and maintain recommended environmental conditions for optimal print quality.

3) Instruction – use the product:
Use the product according to the marked measurements to achieve the desired cleaning strength. The product contains three measurements marks, indicating the amount in millilitres (ml) per wash:

• 30 ml – Light wash: For lightly soiled laundry with few or no stains or odors.
• 50 ml – Normal wash: For regularly soiled laundry with some stains or odors.
• 75 ml – Heavy wash: For heavily soiled laundry with strong stains or odors

Measure the product to the appropriate mark based on your laundry needs.

4) General warning:
Please take note of the following important safety and usage guidelines:

• The recommended minimum age for using this product is 10 years and older.
• If the product is used with a specific washing powder, no not use a second or different washing powder afterward, as this may cause clotting or sensitivity reactions.
• If the product has not been impregnated (treated for waterproofing or protection), do not use liquid detergents or liquids on it.