A simple slide-on two part shell to protect the Liven series synthesisers (such as the Evoke) from knocks and scrapes. Ideal for light home use but probably not sufficient if you are gigging!
The two part shell slides on easily but depending on print settings may be too tight - if that is the case just use you print slicer to enlarge it a fraction.
I printed this using PLA+ with 0.2mm layer height but any filament should be fine and choose a layer height that works for you.
I have included left and right sides for a normal 2 part shell but if you wish you can use the open ended sleeve version.
OpenSCAD files are included for anyone who would like to play around with this.