Summary

Support sleeved cards. I use Sleeve Kings (60 micron).

If you put everything into the box, there is 18mm space left in the top part. So if you want to store it vertically, you need to print or put something into that space. I used punchboards from other games.

To obtain the insert as shown, print the following:

• 14x Cubitos Sliding Lid Tray (https://www.thingiverse.com/thing:4817268)
• 1x Cubitos_Cards
• 4x Cubitos_Tray
• 1x Cubitos_Spacer_1
• 1x Cubitos_Spacer_2