The inspiration comes fromMaike770's version 

Like other commenters, I encountered the problem of labels breaking when the model was printed vertically.

Therefore, I decided to design a version with stronger labels.

Changes:

- Rotate the print direction by 90°

- Hexagonal base -> Larger contact area, better adhesion to the heatbed

- Layer height 0.16mm -> The label needs three complete layers

- Strengthen the transition from the base to the label

Due to the change in the printing direction, support is now needed. I use manual tree-like supports, and I only mark the labels themselves.

When removing the support, it's best to do it as close as possible to the thickest base part of the label.