Diffuser for Energizer romeo;

The beam was too dirty, was focused on the LED die

really annoying!

The thickness of 1.92mm was selected for the nozzle to make 0.4mm 4 perimeters.

Now the torch is much more usable.

Lose a few lux distance, improves lighting closely.

Use transparent filament;

I used transparent PMMA. (Plexiglas)

Print Settings

Printer Brand:

RepRap

Printer:

Rafts:

No

Supports:

Resolution:

120 micron

Infill:

Notes:

Using clear filament ;

Nozzle > 0.4

Perimeter shells > 4

Exstrusion Width > 0.52

Category: DIY