fits Digitelektros LNAs up to v1.1 :3
needs 4 self tapping m2 screws, at least 5mm long I guess.

I guess it also fits any other pcb with 34-35mm length and 21mm width, up to 1mm thick with sma ports on each end centered...

The hole for the dc connector is slightly offset on the v1.1. use DigitLNA_v1.1_CaseTop.stl for that.

DigitLNA_v1.x_CaseTopClosed.stl has no hole for the dc pin.

spin around the Tops for printing im too lazy