Just an angled bracket to take a 13 Pin trailer/caravan socket. I wanted to keep the plug on my caravan dry and out of the way, I saw a few holders on here but nothing will keep it as dry as the actual socket and they are not expensive so I made this to hold it at an angle.

Uses M5 screws that come with the socket. I sized the three holes on the front to tap out and the four holes for mounting to clear an M5 screw on my printer. your printer may give different results from mine.

I printed with a 0.6mm nozzle, 0.3mm layers, three walls and 20% infill which was probably overkill but did the job.

Tronxy

Tronxy XY-2 Pro/Pro 2E/XY3 SE

No

No

20%