Mount Phone Clamp Large
Quick Sling
AIで類似品を検索
印刷プロファイル(0)
モデルファイル(0)
0
0
0
公開日時:2026-03-05 21:45:06
0
0
000説明
モデルソース
レビュー(0)
The "Mount Phone Clamp" from "Modular Mounting System" by HeyVye is a little small, if you have insert you phone in a booklet phone case. So I enlarged the clamps a little bit. They are still compatible with the rest of the "Modular Mounting System".
How I Designed This
The steps of my approach have been as follows
- Download Mount_Phone_Clamp_201118.zip Extract the files "Mount Phone Clamp A v6.stl" and "Mount Phone Clamp B v6.stl" Load "Mount Phone Clamp A v6.stl" into [PrusaSlicer](https://www.prusa3d.com/de/page/prusaslicer_424/) Cut the object into two parts on the z-axis 10.24 mm Stretch the upper part from z=11.32 mm to z=20.77 without changing x and y Export both parts in separate STL files use [Tinkercad](https://www.tinkercad.com/) to rejoin the parts, with overlapping of 0.01 mm Load the file "Mount Phone Clamp B v6.stl" into [PrusaSlicer](https://www.prusa3d.com/de/page/prusaslicer_424/) Cut the object into two parts on the z-axis 5 mm Stretch the top part from z=14.56 mm to z=25.57 mm without changing x and y Export both parts in separate STL files use [Tinkercad](https://www.tinkercad.com/) to rejoin the parts, with overlapping of 0.01 mm optional: Let [PrusaSlicer](https://www.prusa3d.com/de/page/prusaslicer_424/) simplify the final mesh You may can do cuting and stretching also within [Tinkercad](https://www.tinkercad.com/).
モデルソース
オリジナルリンク: 詳細を見る
CC-BY-SA