When I built a small self-driving Robot, I came across a Problem where I had to measure a Distance to the next Obstacle for multiple Directions. I didn't wanted to use mutiple sensors because the wire would've been more complex than it already was, so I decided to use some small Servo Motors to turn the Sensor.

So I've designed these Mounts for an Ultrasonic Sensor and a PiCamera. The Servo Motors had their tiny Brackets screwed on to wich I taped the Mount using double-sided Tape. If you are aming for a less wobbly Connection, I'd recommend you to use Super Glue instead.

For the PiCamera Mount, the Camera is shifted a few Millimeters so you can feed your Connection Cable through the small Slit in the Bottom. I'd also recommend you to leave a bit more Space around the whole Construction than you can see in my Image.