Newly designed enclosure for the BTT TFT70 7inch touchscreen display. I have been using this enclosure for about 2 weeks now and it works great. Very solid and minimal movement whilst touching. That was my big issue with previous designs. So this is iteration number 3 and seems to be great. You will need a few M3 x 20 mm screws as well as a few M5 x 5 mm screws with your choice of T-nut style. Also you'll need a couple M5 x 8 mm screws with nuts to attach the enclosure to the mounting arm. So, 6 M5's and 4 M3's in total with 4 T-nuts and 2 standard hex nuts.

There is also room for the WiFi module to be installed on the screen. I have the WiFi module on both of mine and they fit great.

edit The reason for the added GRID on the inside of the rear cover is because there is so much area on this piece that it has a tendency to raise on the corners and also warp once removed from the bed. So I added some structural rigidity to this area to minimize the chances of that happening. Both of the enclosures I have installed now have this grid pattern and it solved the warping issue I had on previous prints