Simplified version of the "Logo Dunk" corner stand: https://www.printables.com/model/152529-gamecube-logo-dunk-corner-stand

Functionality-wise it's almost the same. However due to the reduced size, this stand will be LESS stable. Use at your own risk!!!

=================================

Both the bare and GBP-attached console get their respective stand. Note that they are not interchangeable.

Wired controllers are NOT recommended for obvious reasons. However if you HAVE TO, use a controller extension cable, strain-relief the plug of the extension somewhere, then connect your wired controller to the extension.

Slots for you to attach a velcro band is on the back, making cable management possible.

The stands are compatible with the IKEA LACK wall mount (255mm tall).

Support is recommended. If your support doesn't separate easily, it's your own fault. Check your slicer settings.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

Yes

Resolution:

0.2

Infill: 

10%

Filament: Generic PLA Any

Notes:

Use support.

Otherwise pretty simple.

Category: Video Games