3D print a case for the Adafruit PyPortal! Build a portable IoT project using Adafruit's PyPortal and PowerBoost. Get started with circuit python and program hardware with a touch screen display!

The enclosure features snap fit covers and a bracket for securing all the components. Secure the PCBs to the 3D printed case with machine screws. The back cover snap fits and features a spot for a bigger speaker. There’s also a nice cut out for the micro SD card slot. You can use a toggle switch to power the device on and off. You can also recharge the lipo battery over USB. The face plates can be swapped out so you can build a custom keypad.

Learn guide, documentation, code:
https://learn.adafruit.com/pyportal-case/
https://learn.adafruit.com/adafruit-pyportal

Get Adafruit PyPortal https://adafru.it/4116

Adafruit PowerBoost 1000C
https://www.adafruit.com/product/2465

Mini Oval Battery
https://www.adafruit.com/product/3923

1200mAh lipo battery
https://www.adafruit.com/product/258

Panel Mounted Switch
https://www.adafruit.com/product/3221

Print instructions

Licence: Creative Commons - Attribution Category: DIY