Summary

Outdoor Plant Pot Stands

I created these stands to elevate our outdoor plants during the summer months. I found that leaving pots directly on the deck often left stains. These plant pot stands lift the plants off the surface to prevent staining.

I've created several different diameters, but if you're familiar with FreeCAD, you can use the provided file to create any size you might need.

Included Sizes

• 10cm diameter
• 13cm diameter
• 15cm diameter
• 17cm diameter
• 17.5cm diameter

Print Settings

• Layer height: Standard (0.2mm recommended)
• Infill: 15-20%
• Supports: Not required

Materials

• Recommended: PETG or ASA for best UV and weather resistance
• Alternative: PLA (may require reprinting periodically due to UV degradation)

Features

• Height: 20mm
• Built-in drainage channels
• Single-piece design - no assembly required
• Weight capacity: Approximately 14kg (30 lbs)

Notes

• If using PLA outdoors, monitor for UV damage and reprint as needed
• For maximum durability, consider PETG or ASA filaments