Since the printing temperature of many wires may differ by 10 degrees from the temperature recommended by the manufacturer, I created these temperature towers and saved them as projects so that I could find the correct temperature as quickly as possible.

There are four boards, each with four different temperature towers, which can determine the temperature range between 300 and 220 degrees.

Just open it as a project, select the corresponding board with the required temperature window, and then print it with the required materials.

Because people often forget to set the temperature of the first layer of the temperature tower, I've already entered the appropriate temperature in the first layer, so you don't need to worry about anything. Just select the correct slot

Depending on the material, you need to adjust the temperature of the printing platform.

For reference only

The base model is not my original creation. I found it on Thingiverse and modified it because the STL file had some flaws and always printed poorly.

I wish you a fun time determining the temperature.