Customize Your keychain with your letters or text. 

1. Add text to the model, set the font type and size, place the text so that it is in the center of the model, and then change the text color to the desired color. It is important to set the letter thickness to at least 0.4 mm.
    

   

2. Move the entered text along the z-axis until it is not level with the top of the model. For a letter thickness of 0.4 mm, this is +1.6 mm. The top layer is ready.
    

   

3. For the bottom layer, perform the first step, then rotate the text 180 degrees around the y-axis.

   

4. Move the rotated text along the z-axis until it is not level with the bottom of the model. In our case, for a letter thickness of 0.4 mm, this is -1.6 mm.
    

   

5. If you prefer, you can rotate the text 45 degrees around the z-axis.
    

   

6. Slice and Print

If you create your own print profile with your own text, you can upload it, allowing others to print it as well. THX!