A tribute, on this special day, to mothers everywhere.

I created this project using HueForge, inspired by the beauty and delicacy of a rose.

Dimensions: 96x200 mm

Extra idea: it can be transformed into an elegant fridge magnet by gluing a small magnet to the back!

Printed with AMS system

Filament Change Instructions:

• Start with black.
• At layer #13 (1.12mm) switch to red.
• At layer #17 (1.44mm) switch to green.
• At layer #20 (1.68mm) switch to glow pink for the rest of the print.

Filaments Used:

• Bambu Lab PLA Basic Black - Transmission distance: 0.3
• Bambu Lab PLA Matte Red - Transmission distance: 4
• Bambu Lab PLA Basic Green - Transmission distance: 3
• Bambu Lab PLA Glow Pink - Transmission distance: 3.5

This print uses 4 unique filaments.

Note: You can customize the rose as you like! I chose glow pink PLA to create a unique effect in the dark 🌙

Please like, review, follow and upload your project.

I dedicated a lot of time to the design and allow it to be used for free (even commercially).

HAPPY PRINTING AND HAVE FUN.