Simple LED lamp holder to illuminate the extruder and bed while printing. Nothing fancy but practical. I used an inexpensive 12/24v LED and holder, heat shrink to cover the holder, one of the medium length hex bolts included with the A8 to attach it to the cooling fan. I spliced it to FAN 1 (heat sink fan) wiring for power. You can find the LED and holder on Amazon or eBay, very low cost.

Anet

A8

Yes

No

0.16

25%

190 C for extruder, 60 C for bed, 60% cooling fan. Printed using CURA 4.x.