Summary

The Easter stamp set consists of two body models and six printing inserts with various motifs.

The inserts are printed from flexible TPU-95A material. They are designed to fit precisely into the stamp body, so if you are using a rigid material, I recommend reducing the size of the insert. It is best to use the finest print to prevent unevenness and choose a low thickness for the top and bottom layers to maintain flexibility. Sandpaper can be used to smooth the image layer.

The stamp body is designed in two sizes for inserts with diameters of 2 and 3 cm. I recommend printing on the storage surface of the handle. For large stamps, print with support. PLA material used.

The size can be adjusted as desired by proportionally increasing the X and Y scale and maintaining the Z scale. Illustrative photo of a rabbit stamp printed at 170% magnification.
For a postage stamp of actual size, click on 135%.
To save filament, the body only needs to be printed once; the inserts can be changed repeatedly.
Printing on an egg with printing ink: boil or degrease the egg, print on it and let it dry (for a longer period of time); after drying, coat it with varnish (hairspray is fine).