Summary

Here are some shocks for the SCX24, are they good? no, do they work? Yes they do. Have fun!

These were just an experiment, so there are some caveats:
-- These should be printed with a .2 nozzle to get the thread detail (this is what I used on an A1 Mini)
-- They are not meant to hold liquid/oil
-- They are fragile

To put them together:
-- Screw the adjuster ring onto the main body housing, set aside
-- Slide the lower barrel (small one) into the upper barrel (the medium sized one)
-- Drop both barrels into the main body housing
-- Screw the shock top cap onto the main body housing
-- slide the spring up onto the main body housing assembly
-- compress the spring and grab the small barrel (be careful not to pull it too hard or it will pop out) and thread on the bottom cap end