PS4 Slim & Fat Button + HDD Cover Set
This is a custom replacement button and HDD cover set for the PS4 Slim and PS4 Fat models.
Included in this set:

🔘 PS4 Slim Power and Eject Button

🧩 PS4 Slim HDD Cover

🔘 PS4 Fat Power Button

🔘 PS4 Fat Eject Button

These parts are designed to replace missing or damaged buttons/covers on your PS4. They're modeled as close to the original sizes as possible, but may require slight sanding or fitting depending on your printer tolerances.

⚠️ Note: This is my first time modeling, so go easy on me! 😅
I welcome feedback and suggestions if you'd like improvements or remixes.
⚠️ Fitment Note
The small power/eject buttons may be a tight fit, depending on your printer's tolerances.
This is easily fixable with a bit of sanding paper for a smooth install.

Print Settings

Material: Recommended PLA, but any filament will work.
I used PLA+ for extra durability.

Nozzle Size: 0.2mm recommended — the parts are small, so thinner layers help with strength and better detail.

Layer Height: Choose lowest possible settings in your slicer according to nozzle size.

Infill: Doesn’t matter — the small size makes it nearly 100% solid by default.

Supports: MUST HAVE!

Bed Adhesion: Standard — USE A BRIM if you're concerned about warping or lifting.

Thank you for supporting my modeling journey!