This mount can be glued in place and allow removal of the Flite Test 9g servo. I built the FT Storch and one of the wires was not fully seated so I had to tear into the wing to fix it. If I had installed a mount like this, I could have simply removed the screws and made the necessary adjustments. I have modeled this in google sketchup. Included are two version - one that can be glued on one side and one that can be glued on two sides. The mounting surfaces are 1mm thick, and the hole is 1.8mm diameter. Hole depth is 7mm.

Creality

Ender 3 Pro

No

No

200

20