1 Inch PVC Clips with holes for attaching signs or other organization uses.

I was building a backdrop for my daughter with 1" PVC and wanted something to attach signs on the top as well as something to secure the drapes we bought to the PVC easily. So I whipped up some quick clips and they worked great!

One side I built out flat so the sign could rest against it and I just used the 3M "velcro" ish adhesive strips to the flat part and the sign to make it stick. I enclosed some pictures of the whole thing to give you some idea of how I used it.

I only built these against 1inch Schedule 40 PVC. I would be pretty easy to rebuild these in another size if you PM me the outer diameter of the pole.

Special thanks to Fusion 360 again for permitting me to use their software for free which was the software used to make these.

I built shorter and longer versions - 35mm and 85mm long depending on the need. The other thing you may need to do is up the infil. I had one of them make a cracking sound - it did not break apart and it still holds just fine, but once I upped the infil to 50% it seemed to resolve the issue.

Have fun with these.

Michael

FlashForge

Dreamer

No

No

50