Battery holder for Chopper. Uses 2 Ryobi batteries in parallel. Designed to work with MrBaddeley's Chopper files. A Top with no cut-outs is included if you want to use a different volt meter or switch.

No supports needed. No gluing needed. There is one bridge for the switch hole.
All parts will fit on a Bambu X1C, or P1S.
Hole plug stl is provided to fill in recesses in the base when attaching to the main droid body. You could use washers as well.
Print 2ea of the Battery Bottom 2x. 4ea of the brackets and hole plugs.

I printed in ABS and used a 8mm brim and it fit on my X1C.

Wiring diagram in the pictures. This is for the switch listed below and it will light up when on.

Switch 9-30V, 16mm, fixed self-locking. Here is the one I used: https://www.aliexpress.us/item/3256805989674586.html?spm=a2g0o.cart.0.0.2e03378dE011Cp&mp=1&gatewayAdapt=fra2usa4itemAdapt

Volt meter 50A red or blue: https://www.aliexpress.us/item/3256805834394069.html?spm=a2g0o.order_list.order_list_main.22.5b5b5e5b0brMux&gatewayAdapt=fra2usa4itemAdapt

Relay: https://www.amazon.com/gp/product/B08GP5ZRTN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

XT60 connector: https://www.amazon.com/gp/product/B0CQK1P1DP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Battery Adapter: https://www.amazon.com/gp/product/B0C5QQHKG7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

M3mm square nuts (4ea)
M3 Hex Nuts (14ea)
M3mm x 0.5mm x 10mm Flat Head screw (4ea)
M3mm x 0.5mm x 12mm Flat Head screw (6ea)
M3mm x 0.5mm x 14mm Flat Head screw (8ea)
M6mm x 1.0mm x 40mm Round Head screw (4ea - to replace the 6x30 screws)

Based on the concepts from Razorbac battery box for R2D2 https://www.thingiverse.com/thing:6686892?fbclid=IwY2xjawE4L1RleHRuA2FlbQIxMAABHf28tKDZdkhrjYfUE2CSsh9302fR5y68ZxTHSAPXxykfRbWdZAW2HUvuCA_aem_QwctHO79S6GB7uNa579wWg

Also thanks to MrBaddeley for his awesome droid files.

Bonus: looks like Miss Minutes from Loki

Bambulabs

Bambu X1C

No

No

.2

10%

Switch cutout uses a bridge, does not need support.