Craftbot Plus PRO Extruder Fan Upgrade.
Using the metal bracket from your old Craftbot Plus Fan Assembly, print out these plastic adapters in order to upgrade the fan assembly to the new blower fan system.

You will need:

• 2 pcs. Blower Fan 4010B 12V 40x40x10mm (they're available on eBay or AliExpress)
• heat-shrink tube to isolate the wires(or electrical tape)

Print 2 adapters, one for each fan and 4 pcs of the nuts that will help hold the wires in place. Parts need to be oriented correctly on the print bed, just place the adapter flat and add supports.

Craftbot PLUS

No

Yes

220

20