Use this adjustable camera stand to control the height of your desktop webcam. —It can be folded from about 45 mm to fully unfolded at 300 mm

Most of this model isAll-in-one printing, except for the top and the screws of the camera.

It is recommended to print the tolerance test first to ensure that the mechanism is suitable for you.

====

After printing, make sure to push from the bottom to release each cylinder.

Pass the camera screw through the top and connect it to the webcam. Pull out the smallest cylinder and tighten it to make the connection.

===

After assembly is completed, lift the bracket and tighten it to the required height.

====

Important - Please pay attention to the direction of loosening and tightening the screws.