This is a spice rack that I designed to mount directly to Multiboard. Whilst I built the model from scratch, I copied the idea from an Instructables project and they should take all the creative credit for the idea: https://www.instructables.com/Modular-Spice-Rack/

I also reduced the size of the bolt head from a model downloaded from the Multiboard website using Blender.

For the railings of the spice rack you'll need to buy some 1/8 inch dowl. You can pick these up cleaply from the arts and craft section at Walmart, or at select Home Depots.

I found the following print settings worked:

• 15% infill

• Used the default 2mm perimeter

• The honeycomb infill pattern is nice as it makes the print more aesthetic especially with a semi transparent plastic

• I printed in PETG mainly because I wanted to use this in a camper. But in the house etc PLA makes sense.