I really loved the original design by @jerryfudd but I wanted it a bit more modular for my requirements.

As I am still learning with Fusion360 I didn't modify the original part, I built from scratch using @Jerryfudd's design.

There are 4 parts:

The Base: The bottom part of the stand

The Mid: This is the middle part that allows you to daisy chain as many Argon One cased Pi's as tall as you see fit!

The Top: The top piece to finish off the stand.

Top Shelf: An alternative to the top, this variant offers you a flat surface so you can put some of your ornaments on, or maybe non-Argon one pi's!

!WARNING!
Please be aware, I do not recommend that you stack a large amount of Pi's. Making a huge tower will most likely be unstable and you may end up damaging yourself, your pi's, your belongings and maybe your pets!

Although it would be interesting to see how high the tower can be, please think about safety first!

Prusa

i3 MK4

Doesn't Matter

No

0.15 / 0.2

20%

The parts should already be orientated correctly in the STL files, all parts print on their backs and should not require supports, brims or Rafts.

If you are having adhesion problems, please follow your own method (brims/rafts) to help.