It works well with my iPhone 12 mini, if your phone has different dimensions, you should check them first.

This is a magsafe mount for a 1/4" tripod. I used these magsafe magnet glued in the print:

https://www.amazon.de/gp/product/B093PL1CD8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (outer diameter: 56mm, thickness: 3.75mm)

The model has a 8mm hole at the bottom for a 1/4" threaded insert or you use the model with the printed thread (not tested yet).

Print Settings

Printer Brand:

Anycubic

Printer: 

All-metal Mega

Rafts:

No

Supports: 

No

Resolution:

0.3mm

Infill: 

20%

Filament: Overture PLA black

Notes:

I used a 0.8mm nozzle.

Category: Camera