Summary

These are the .STL files for a three gauge cluster designed to work with 2-5/8" diameter gauges from Speed Hut and to match the dashboard curve of a 1992 Subaru Sambar, but it can also be mounted on a flat surface. The front Panel includes holes for the backlight dimmer knob and a reset button included with a tachometer.

The images of the built unit show prints using HP's MJF process, printed at Xometry in Gray Nylon 12 Glass Filled material. NOTE: If you use MJF, the bottom surface of the Mounting Foot will need to be sanded to bare plastic or the 3M strip will not stick.

The bill of materials for the full build is:

(1) Housing 3x66mm Split
(1) Panel 3x66mm
(1) Grommet Slide
(2) Mounting Foot
(3) 2-5/8 Speed Hut Gauges w/ Accessories
(4) 3M Command Black Large Picture Hanging Strips (Velcro)
(2) 8D Copper Nail (McMaster 97952A156 or similar)
(10) M3 Thread-Forming Screws (McMaster 99461A944)
(10) M3 Washer (McMaster 98689A112)