Please show me your prints after theyre done, thx :)

This is the Fully 3D Printed Steering Wheel for your PS5!

Do you want to race but dont have a Steering Wheel? This little project might be for you!

You need:

a printable M6x60mm screw and nut or a different screw (i screwed it with a BIIIGG one after making the video)

a wooden board,

hot glue or tape,

and to have fun!

To add some resistance to the wheel for more realistic driving, print out another base and take a huge screw and drill through the base like i did as it will not fit in the hole, and you have a better rig :)

Build Instructions:

First, take your screw, base, and the wheel. Place the wheel in the base and put in the screw and screw it in with the nut, make it tight or this will happen:

Then take your hot glue and glue your Dualsense to the Steering Wheel (dont worry, it comes off) or use Double sided tape.

Then glue, tape or screrw the base to a wooden or whatever board with the wheel.

Have fun!

(P.S Use the X /     controls on Gran Turismo, the triggers might be uncomfy.)