A modular plant stake that is printed in multiple parts and can be extended as high as needed.

First print a spike and a base section and screw them together. Afterwards you can expand upwards by printing multiple top sections. Tolerances are built into the design so horizontal expansion shouldn't be required for a moderately tuned printer.

The design includes holes along the edge to allow wire ties to be used to support the plant.

Printed in PLA with 2 walls and 15% infill and a .2mm layer height. 

The top section is printed diagonally to fit on the print plate. Both the top section and base should be printed flat with supports for the screw posts, and if you're bridging isn't great, some tree supports into the screw holes. The stake should be printed vertically with the point at the top.