This minimalist door wedge can be used for doors that have a gap between 18mm to 30mm from the floor.

I have also created a version with a height of 8mm. Which is suitable for a height of 8-14 mm.

The big advantage of this wedge is that it does not stand out over the door and is therefore not very visible.

This wedge is most suitable for indoor doors that should be open all the time.

If your door has a smaller or larger gap to the floor, let me know and I will customize the wedge for you.

Print instructions

Category: Household Supplies Summary

This minimalist door wedge can be used for doors that have a gap between 18mm to 30mm from the floor.
The big advantage of this wedge is that it does not stand out over the door and is therefore not very visible.

This wedge is most suitable for indoor doors that should be open all the time.

If your door has a smaller or larger gap to the floor, let me know and I will customize the wedge for you.

Print Settings

Printer: Prusa MK3S
Kodama Trinus

Rafts: No

Supports: No

Resolution: 0,15mm

Filament: PETG Das Filament PETG 
Notes:

PLA would also be possible.
A fine resolution should be used because of the toothing.