I kept misplacing the Shield remote so decided to make a nice holder base for it.

To add a little refinement I embossed the Nvidia logo into the front.

I made sure to give a really nice fit to the rounded triangle profile of the remote.

I wanted it to have a good amount of weight so I modelled in three pockets near the bottom that accept 6x washers (3 pockets of 25mm x 3.5mm).

For anyone that can't be bothered with that I added a solid version too.

Printing tips

1. Print with a decent amount of infill to help give extra weight e.g. 30-40% Grid
2. Use variable layer height near the top to give a nicer blend of the top layers
3. If printing the washer version, remember to add the pause in your slicer at the correct layer and ensure your washers don't protrude above the layer next to be printed

Print Settings

Printer Brand:

VoronDesign

Printer: 

Voron2 350

Rafts:

No

Supports: 

No

Resolution:

0.2 - 0.08 (Variable Layer Height)

Infill: 

30 - 40 %

Category: Household