Summary16x16cm table for the head end of the Ikea Malm bed Very easily customizable with SketchUp Make if you need a ~14cm version for a smaller printsize. I'm using two as speaker holders I've uploaded two versions, a massive and one with 3 large holes to save printing time and cost. I've printed mine with Esun PETG, first layer 235°C, all other layers 225°C, bed 75°C, 0.3mm layer height, 0,4mm Nozzle, 1 outline layer only (two makes it much more stable but needs more printing time), 11% fast honeycomb infill, 3 Top/Bottom layers, fan on 50% from layer 25 onwards With these seetings, V1.2 sliced with Simplify3D, it needs about 90g filament and 4-5h printing time and holds more than 10kg. V1.1 is even more stable but needs longer printing time and is even more stable, but need more filament.