Important: Before you print, please, read this.

Support my work donating US$1,00.

Recently I realized my drill bits where in a mess. I found this amazing design by KSUSZKA and decided to give it a try.

Unfortunately, the original case lacked places for some larger drill bits I have, so I started to make it more suitable for my needs. In the process, I found out the hole case could be easily dimensioned just by specifying the smaller and larger drill bit it should contain.

After a few days poking KSUSZKA code, witch is very well written by the way, I came out with this improved version.

I put some STL files, but I thing no one wish a case with a big "Your Name Here" on the front. Customize your own and don't forget to post a make of your case!

If you intent to make a large case, like mine, I strongly recommend you to print a fit test first. Print just the top of the base and the bottom of the cover to check how the two parts fit together. If it is too loose or too tight, go to the Advanced parameters and adjust the CoverGap. Check also how the drill bits fit on the holes. You can adjust it with the Clearance parameter.

I got all the drill bits sizes from a Irwin catalog. Check if yours are equivalent or make the appropriate modifications on the code.

Creality

Ender 3

Doesn't Matter

No

0.2

20