PI-ZERO-W UMPC / Cyberdeck MK1

This is a umpc-laptop-case for a pi-zero-w to become a portable-to-go-hacking-station.

Anycubic

i3 Mega

No

No

20

• raspberry pi-zero-w
• adafruit display-kippah without Touchscreen (also possible with touch)
• adafruit power boost 100 charger
• LiIon battery 2000mAh
• adafruit 5" 40pin display
• small wireless keyboard with trackpad and shoulder-keys.
  • https://www.amazon.de/Tastatur-Touchpad-Fernbedienung-Wireless-Beleuchtet/dp/B073R71V2Z/ref=pd_sbs_0_2/258-6942216-6650265?_encoding=UTF8&pd_rd_i=B073R71V2Z&pd_rd_r=fc563d04-4f32-11e9-9ec5-e94087deee67&pd_rd_w=5b5wY&pd_rd_wg=6j64L&pf_rd_p=74d946ea-18de-4443-bed6-d8837f922070&pf_rd_r=ZM2JQQVP4D43BW5M3ET5&psc=1&refRID=ZM2JQQVP4D43BW5M3ET5
• SanDisk Ultra microSD card 16GB

STEP 1: ... disassembling the wireless keyboard

First of all you have to disassemble the keyboard case and battery. Only the board and the key-slice will be used. To open the case, open the screws and gently pull on the edges to get the keyboard-board out. All plastic parts can be wasted, we only need the insides ;-)

STEP 2: ... soldering parts together

Now we have to solder everything together. First of all connect two wires to the "Adafruit Power Boost 1000" and the small "powerswitch". I used a green and black cable.

Next give 5V power and ground to the keyboard. On the board there is already a point where you can solder a red an black cable (USB power). The other side goes to the "Power Boost" on 5V and ground.

Next we have to give power to the raspberry. Since we are using a "Display Kippah" to control the LCD we can slice power from this shield, through the GPIO-Pins, to the raspberry pi. To manage this simply connect a red "5V" and a black ground cable to the corresponding pins on the Kippah. The other side goes straight to the "Power Boost".

Now comes the harder part: Soldering a jack for the USB-dongle to connect the keyboard to the raspberry. To achieve this, i followed a tutorial (TODO: add link)

TODO: To be continued....

STEP 3: ... printing Parts

TODO: To be continued .....

STEP 4: ...

TODO: To be continued ....