Creality Hi ceiling light bracket
Daisyprints
AIで類似品を検索
印刷プロファイル(0)
モデルファイル(0)
0
0
0
公開日時:2025-04-20 11:38:43
0
0
000説明
タグ
モデルソース
レビュー(0)
このコンテンツは自動翻訳されています。 原文を表示
These are three lamp brackets designed for the Creality Hi printer. You can choose any of the three designs and print two brackets each.
Universal type: You can modify it as needed, or use it with light strips equipped with adhesive backing.
10mm channel type: Print this bracket and 10mm channel for use with 10mm-wide LED strips. The 10mm channel can be printed after being rotated by 45°.
Cabinet light type: It can be purchased on Taobao. All brackets can be printed sideways. If you use a 10mm channel, you need to print it with the back facing down. These brackets can be clamped onto the top crossbeam of the Creality Hi printer. For the 10mm channel-type brackets, after inserting the LED channel into the bracket, you can add your own 10mm LED strips. For the cabinet light-type brackets, the LED strips in the link should also be able to be easily inserted.
When designing, I considered the side-mounted CFS buffers and made sure that the light bulbs wouldn't interfere with the extruder when fully raised. However, the PTFE tubes might rub slightly against each other depending on the length you cut them to.
In addition, regarding the link you mentioned, I tried to analyze it but failed. It might be a problem with the link itself or with the network connection. You can check the legitimacy of the link or try again later.
タグ
モデルソース
オリジナルリンク: 詳細を見る
CC BY