Don't adjust the size in the slicer!! The layers won't display correctly.

Don't change the size, otherwise, it will lead to color change errors, which will affect the entire print.

Use my print configuration file, otherwise you won't be able to get the desired results.

It can be printed safely without AMS, and it can be used with any printer.

I hope you like it. I hope you like it. If you want to support me, please give it a thumbs-up and vote for five stars. Thank you!

Print with a 100% infill rate, a layer height of 0.08 mm, and a base layer of 0.16 mm

The size of the model is 180x180mm.

You can print with a higher layer height at a minimum depth of less than 0.48mm.

The maximum depth is 2.2mm, and the actual depth is 2mm.

The filament used:

Matte charcoal color transmission distance: 0.1

Basic silver transmission distance: 0.7

Matte ivory white, transmission distance: 1.7

Matte lilac purple, transmission distance: 0.4

This print uses four kinds of consumables

Exchange instructions:

Starting with black

Change to silver on layer #9 (0.8mm)

Change to ivory white at layer #12 (1.04mm)

Change to charcoal gray on layer #14 (1.2mm)

Change to light purple on layer #15 (1.28mm)

On layer #22 (1.84mm), change the color to ivory white to complete the rest of the design.