English

3D Printing Guide: Vernier Caliper

Introduction:This guide introduces the 3D printing of Vernier calipers, a multifunctional measuring tool designed for precise measurements to two decimal places. The calipers are printed in multiple parts and assembled after printing. Due to their delicate structure, they should be printed using a 0.2mm nozzle.

Materials and printing settings:

• ASA or ABS are ideal choices due to their resistance to environmental factors and sustainability.
• If the caliper doesn't need to be used frequently, you can also use PLA or PETG.
• Using a 0.2mm nozzle can achieve high detail accuracy and sharp edges.
• It is recommended that the floor height be between 0.1 and 0.2 mm to ensure accurate measurement.

Printable vernier calipers:

• Print the various parts of the caliper, including the ruler and the slider, separately.
• Ensure that all details are clear and the edges are sharp, so that they can be assembled accurately.

Assembling a vernier caliper:

• After printing, remove the burrs from all parts and disassemble the support structure to ensure smooth movement.
• Insert the slider into the guide rail on the ruler and assemble the caliper.
• Test the movement of the slider to ensure that it moves smoothly, but not too loosely.

Use a vernier caliper:

• Calipers are designed to measure the inner diameter, outer diameter, and depth.
• The accuracy of the caliper depends on the printing settings and the assembly precision.
• Ideally, it allows measurements to be made within a range of two decimal places.

Maintenance and upkeep:

• Keep the caliper clean, free from dust and debris, to ensure smooth movement.
• Regularly check whether there are any loose parts and install them properly as needed.

Conclusion:

The 3D-printed Vernier caliper is a useful and accurate measuring tool that can be easily assembled. Its accuracy depends on the printing settings and assembly, but ideally, it can achieve measurements with a precision of up to two decimal places. It is recommended to use ASA or ABS, but PLA or PETG can also be used. With this guide, you can print high-quality calipers to meet your needs.

From Germany

3D printing instructions: slide rule

Introduction:This guide introduces the 3D printing of slide calipers, a multifunctional measuring instrument designed for precise measurements within the range of 2 decimal places. The slide calipers are printed in several parts and then assembled. Due to their filament design, they should be printed with a 0.2mm nozzle.

Material and printing settings:

• ASA or ABS are ideal because they are more resistant to environmental impacts and wear and tear.
• When the caliper is not subjected to severe deformation, PLA or PETG can also be used.
• When printing with a 0.2mm nozzle, the details are clear and the edges are sharp.
• It is recommended that the floor height be between 0.1 and 0.2 mm to ensure accurate measurement.

Printable slide rule:

• Print the different parts of the sliding ruler separately, including the ruler and the slider.
• Ensure that all details are clear and the edges are sharp for precise installation.

Installation of the slide rule:

• After printing, remove the burrs from all parts and disassemble the support structure to ensure smooth movement.
• Insert the slider into the ruler's guide rail and assemble the parts of the sliding ruler.
• Test the movement of the slider to ensure that it is easy to move, but not too loose.

The use of a slide rule:

• The sliding ruler is suitable for measuring inner diameter, outer diameter, and depth.
• The accuracy of the caliper depends on the pressure setting and the installation precision.
• Ideally, the measurement can be carried out within a range of two decimal places.

Maintenance and upkeep:

• Keep the slide rule clean and avoid dust and dirt to ensure smooth movement.
• Regularly check whether the parts are loose and correct the fit if necessary.

Conclusion:

The 3D-printed caliper is a useful and accurate measuring tool that can be easily assembled. The accuracy depends on the pressure setting and installation, but ideally, measurements within the 2-digit comma range can be achieved. It is recommended to use ASA or ABS, but PLA or PETG can also be used. Using this manual, you can print high-quality slide rules as needed.