Print with 100% infill, layer height of 0.08 mm, and base layer of 0.16 mm

The size of this model is

200x200mm. You can use it with a thickness of less than 0.48mm.

Print at a higher layer height. The maximum depth is 2.2 mm, and the actual depth is 1.7 mm.

Consumables used:

Black. Transmission distance: 0.4

Red transmission distance: 2.3

Yellow, transmission distance: 5.8

White, transmission distance: 6

This print uses 4 unique filaments

Exchange instructions:

Starting with the blacks

Switch to red at layer #7

Switch to yellow on layer #11

On the #16 layer